Published April 28, 2026 ยท Updated October 28, 2026
A comprehensive walkthrough of straight-line, double-declining balance, 150% declining balance, and sum-of-the-years' digits โ plus useful life, salvage value, and full-month, mid-month, and half-year conventions.
Learn how each method works, see worked examples, and understand how to select the right method and convention for each major asset class under U.S. GAAP.
Depreciation is the systematic allocation of the cost of a tangible long-lived asset over its useful life. Under U.S. GAAP (primarily ASC 360), the goal is to match the cost of using an asset against the revenue it helps generate, rather than to estimate the asset's market value at any point in time. To depreciate an asset, you need four inputs: (1) the depreciable cost basis, (2) the useful life, (3) the salvage (residual) value, and (4) the depreciation method and convention. Each of these involves judgment, and small differences in assumptions can produce materially different financial statements.
Depreciable base = Cost โ Salvage value. This is the total amount that will be expensed over the asset's life regardless of which method you choose.
Useful life is an estimate of how long the entity expects to use the asset, not how long the asset could theoretically last. An office computer might function for 10 years, but if your company replaces them every 4 years, the useful life for accounting purposes is 4 years. Useful life should be reviewed at least annually. If circumstances change, the remaining depreciation is adjusted prospectively over the revised remaining life โ prior periods are not restated.
GAAP useful lives differ from IRS tax lives. The IRS publishes prescribed recovery periods (3, 5, 7, 10, 15, 20, 27.5, and 39 years) under MACRS, but those are tax constructs and are not appropriate for GAAP unless they happen to reflect actual expected use.
Salvage value (also called residual value) is the estimated amount the entity expects to receive from disposing of the asset at the end of its useful life, net of any disposal costs. For many assets, salvage value is estimated at zero โ either because the asset has no resale market, or because the disposal costs are expected to offset the recovery.
Salvage value is subtracted from cost to determine the depreciable base. Depreciation stops when the asset's book value reaches its salvage value โ the asset is never depreciated below salvage. Like useful life, salvage value should be reviewed periodically and adjusted prospectively.
Straight-line is the simplest and most common depreciation method. It allocates an equal amount of depreciation expense to each period of the asset's useful life. This produces a predictable, level expense pattern that closely matches assets used evenly over time.
Example: A $50,000 machine with a $5,000 salvage value and 10-year useful life depreciates at ($50,000 โ $5,000) รท 10 = $4,500 per year, or $375 per month.
Double-declining balance is an accelerated method that records higher depreciation in the early years of the asset's life and lower depreciation later. It applies a fixed rate โ twice the straight-line rate โ to the asset's book value (not the depreciable base) each year. Salvage value is not subtracted in the rate calculation but is used as a floor: depreciation stops when book value reaches salvage value.
Example: A $50,000 machine with $5,000 salvage value and 10-year life. DDB rate = 2 ร (1/10) = 20%. Year 1 depreciation = 20% ร $50,000 = $10,000 (book value $40,000). Year 2 = 20% ร $40,000 = $8,000 (book value $32,000). And so on. Many companies switch to straight-line over the remaining life when straight-line produces a higher annual amount, ensuring the asset is fully depreciated to salvage by the end of useful life.
150% declining balance works exactly like double-declining balance but uses 1.5 times the straight-line rate instead of 2. This produces a less aggressive acceleration โ front-loading expense relative to straight-line, but less so than DDB. It is commonly used for assets that lose value faster than straight-line implies but not as quickly as DDB suggests.
Example: Same $50,000 machine, 10-year life. 150% DB rate = 1.5 ร (1/10) = 15%. Year 1 = 15% ร $50,000 = $7,500 (book value $42,500). Year 2 = 15% ร $42,500 = $6,375. As with DDB, many entities switch to straight-line over remaining life once it yields a higher amount.
Sum-of-the-years' digits is another accelerated method, but unlike declining balance, it operates on the depreciable base (cost โ salvage) rather than book value. Each year is assigned a fraction whose denominator is the sum of the digits of the useful life and whose numerator is the remaining life at the start of the year.
Example: $50,000 machine, $5,000 salvage, 5-year life. Sum of digits = 5 ร 6 รท 2 = 15. Depreciable base = $45,000. Year 1 = 5/15 ร $45,000 = $15,000. Year 2 = 4/15 ร $45,000 = $12,000. Year 3 = 3/15 ร $45,000 = $9,000. Year 4 = 2/15 ร $45,000 = $6,000. Year 5 = 1/15 ร $45,000 = $3,000. Total = $45,000.
Using a $50,000 asset with $5,000 salvage value and a 10-year life, here is approximately how the methods compare in terms of expense pattern:
All methods produce the same total depreciation over the asset's life โ the only difference is the timing of expense recognition. Accelerated methods reduce taxable book income earlier and produce a faster decline in book value.
Depreciation conventions determine when depreciation begins in the period an asset is acquired (and ends in the period it is disposed). The full-month convention assumes the asset is in service for the entire month it is acquired, regardless of the actual acquisition date. Under full-month, an asset purchased on March 1 and an asset purchased on March 31 both receive a full month of depreciation in March. This is the most common convention for GAAP financial reporting because it is simple and the timing differences typically immaterial.
The mid-month convention assumes all assets acquired or disposed of during a month were placed in (or removed from) service on the 15th of that month. This produces exactly half a month of depreciation in the period of acquisition and half a month in the period of disposal. Mid-month is required for U.S. tax depreciation of real property (residential and nonresidential buildings) under MACRS. For GAAP financial reporting, it is sometimes used for real estate, but full-month is more common in practice.
The half-year convention assumes all assets acquired during a year were acquired at the midpoint of that year, regardless of the actual acquisition date. This results in exactly half a year of depreciation in the year of acquisition and half a year in the final year (extending depreciation into one extra year beyond the stated useful life). Half-year is the default convention for U.S. tax depreciation of personal property under MACRS. For GAAP, it is used by some companies โ particularly smaller businesses โ for simplicity, especially when monthly tracking is not warranted.
Tax also imposes a mid-quarter convention if more than 40% of the year's asset acquisitions occur in the fourth quarter. This is a tax-only rule and is not used for GAAP.
Under ASC 360, the depreciation method should reflect the pattern in which the asset's economic benefits are consumed. Once selected, the method should be applied consistently. Changes in method are accounted for as a change in accounting estimate (prospective treatment), not a change in principle.
Most companies default to straight-line for GAAP because it is simple, transparent, and acceptable for nearly all asset classes. Accelerated methods are used selectively when the consumption pattern clearly justifies them.
Buildings provide service capacity relatively evenly over their long useful lives, so straight-line is almost universally used for GAAP. Useful lives commonly range from 25 to 40 years depending on construction type and intended use.
Major building components (roof, HVAC, elevators) may be tracked separately under componentization and depreciated over their own shorter useful lives.
Leasehold improvements are depreciated over the shorter of their estimated useful life or the remaining lease term (including renewal options reasonably certain to be exercised). Straight-line is used in virtually all cases.
Heavy machinery is sometimes depreciated using an accelerated method because productive capacity and reliability tend to decline as the equipment ages. However, many manufacturers still default to straight-line because of its simplicity and because maintenance restores capacity over time.
Units-of-production depreciation (not detailed in this guide but acceptable under GAAP) can also be appropriate when output can be reliably measured and the asset's life is more closely tied to usage than to time.
Vehicles lose value rapidly in the first one to two years and then decline more gradually. An accelerated method like 150% DB or DDB can match this pattern more closely than straight-line, although straight-line is still widely used for simplicity.
Technology assets become obsolete quickly. An accelerated method (DDB or SYD) can be appropriate, but most companies use straight-line over a short useful life (3โ5 years) and achieve effectively the same result through a shortened life rather than an accelerated curve.
Office furniture is used relatively evenly throughout its life and is rarely subject to accelerated obsolescence. Straight-line over a 5- to 10-year life is the standard approach.
Internally developed and purchased software is amortized (the term used for intangible assets) on a straight-line basis over its expected useful life. Accelerated methods are rarely used for software because expected benefits typically follow a relatively even pattern once the software is in service.
Although software is technically intangible (governed by ASC 350-40), the mechanics of amortization closely mirror straight-line depreciation of tangible assets.
Land is not depreciated under U.S. GAAP because it has an indefinite useful life. Land is carried at historical cost and only adjusted if impaired. Land improvements with finite lives (parking lots, fencing, landscaping) are depreciated separately, typically straight-line over 10โ20 years.
Most companies establish a written fixed asset and depreciation policy that documents the methods, useful lives, salvage values, and conventions used for each asset class. This consistency supports auditability and ensures all accountants apply the same approach.
Tax depreciation typically diverges from book depreciation. Companies maintain a separate fixed asset register for tax (using MACRS, bonus depreciation, and Section 179) and reconcile the differences as deferred tax items on the balance sheet.
Several errors come up repeatedly in depreciation accounting. Avoiding them improves accuracy and reduces audit findings.
The sections above are U.S. GAAP and tax reference material. They are not a list of CloseFlow features. CloseFlow calculates book depreciation only, using four methods: straight-line, double-declining balance (200%), 150% declining balance, and sum-of-the-years'-digits. Both declining-balance methods switch to straight-line when straight-line is greater, and they stop at salvage value.
Monthly book depreciation entries are generated once an asset is approved. Approve the entry before it can push to QuickBooks Online. If an admin turns on Automatically push approved entries to QuickBooks, that approval pushes the entry immediately. Nothing posts on a timer. See the fixed asset software page for the register, disposals, impairment entries, and the QuickBooks push.
The method has to reflect how the asset is used. Straight-line, double-declining balance, 150% declining balance, and sum-of-the-years'-digits are the book methods covered here. MACRS, bonus depreciation, and Section 179 are tax methods, not a GAAP book method.
QuickBooks Online holds the asset and accumulated depreciation accounts. It does not keep the asset-by-asset book schedule. The fixed asset register Excel template is that schedule. Fixed asset software for QuickBooks Online can calculate the same methods and push the approved entry to QuickBooks.
CloseFlow calculates book depreciation with straight-line, double-declining balance, 150% declining balance, and sum-of-the-years'-digits, using full-month, mid-month, or half-month (first month) conventions. It does not calculate MACRS, bonus depreciation, or Section 179. Approved entries can push to QuickBooks Online.
Start Your Free Trial